Continuous Feed Garbage Disposal with Sound Reduction,1/2 HP Stainless Steel Food Waste Grinding System,Power Cord Included

Easy Disposal of Many Types of Food Waste

MIUI food waste disposer can handle 95% of food waste such as fruits and vegetables, fruit peels and shells, small bones, small ribs, seafood fish bones, small shells, etc.

Cannot handle: plastic bags, hair, large bones, large shells and non-food waste.

One Click – So Easy

Operation steps.

1. Turn on the water tap.

2. Start the processor with one button.

3. Pour the food waste into the grinding chamber.

4.*Please note: After waiting for the food to be completely ground, continue to keep the faucet on and keep it on for 5 seconds and then turn it off.

5. The machine is set with overload protection device, exceeding a certain load or overheating, the machine will automatically shut down.

Blade Free Grinding System

No blade grinding to achieve high-speed rotating impact for multiple cutting and grinding, fine filtering of food residues.

Safety & Environment

Adopt German permanent magnet motor, provide powerful grinding power, can load 1000ml at a time. realize low energy consumption, save time and power and safer!

Current Overload Protection Design

Prevents overload of current, which may cause damage to the machine.

Thickened Feed Silicone Cover

Weaken the noise and prevent the residue from spattering when grinding.

Suitable Size

This machine is suitable for a sink opening of 110mm in size, while its button for the air switch is suitable for a 3cm mounting hole.

Product Q & A

Q: How can I install the machine if the sink diameter is not 11cm?
A: The machine is suitable for sink diameter of 11cm, if the sink diameter is not suitable, we suggest you can use reducer (reducer ring) to change the sink diameter.

Q: How big is the hole of the air switch?
A: It is recommended that the diameter of the hole in the counter top or wall is 2.8~3cm.

Q: Is the machine easy to install?
A: It is very easy to install, installation requires some force. We simulate the installation steps in the product video, currently more than 99% of buyers can understand the installation steps through the video and instructions, if you find it very difficult, it is recommended to ask a professional for installation.

Q: Is the stone sink suitable for installing the machine?
A: It is recommended to judge by the thickness of the sink bottom, if the bottom thickness is 10mm (1cm) or less, it is possible to install the machine. It is recommended to polish the stone sink mouth smooth before installing the machine.

Q: How can I check if the machine is working properly after I receive it?
A: Please install the air switch of the machine, then plug in the power and press the button, the machine can start or shut down normally.

Q: I received a new machine and found that there are scratches inside the grinding disc, how can I do?
A: The product is inspected at the factory, powered on and the machine is started. Therefore, the grinding disc left working traces, this is a normal situation, buyers can install and use the machine normally, please do not worry.

Q: What should I do if the machine is stuck?
A: A jammed state means that the machine has activated the electrical protection function. Please cut off the power and clean all the residues and foreign objects in the grinding chamber (especially the edge gap), insert and turn the grinding disc with a screwdriver, and finally press the red reset switch lightly and power on to turn on normally.